1·Two examples, cavitation erosion and abrasive erosion, are discussed.
文中对气蚀及磨粉磨蚀两事例进行了讨论。
2·The relation between the flow conditions and material surface abrasive erosion of the pump impeller has been studied.
研究了过流条件与泵轮叶片表面冲蚀磨损的关系。
3·The abrasive erosion pattern of the impeller blades of a used slurry pump is investigated by macro observation, and analyzed by SEM method.
对一个实际清淤中磨损失效的泥浆泵轮叶片表面进行宏观观察，并利用扫描电镜作了微观形貌分析。
4·The sizes of filler and abrasive have influence on the solid particle erosion of coating under the given condition, the size of filler be of weak influence on the slurry erosion.
填料粒度和磨料粒度都对涂层的气固冲蚀磨损有影响，但在给定的试验条件下，填料粒度对涂层的浆体冲蚀磨损影响甚微。
5·The elevated temperatures and enlarged impacting angles as well as the coarse abrasive sizes bring forth increased erosion loss for the specimens.
提高冲蚀温度、增大磨料颗粒尺寸和增大冲蚀角都可以增加对耐火材料的磨损。
6·The results show that the higher rough surface will result in the arcing more easily and form higher arc energy, the forms of wear are mainly abrasive wear and are erosion.
结果表明：表面越粗糙，越易起弧，形成更高的电弧能量，磨损形式主要是磨粒磨损、电弧侵蚀；
7·Fixed chokes do not provide this flexibility, although they are more resistant to erosion under prolonged operation or production of abrasive fluids.
固定节流器不能提供这种灵活性，不过它们在长时间的工作下或生产磨蚀性流体的情况下更能抗冲蚀。
8·Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
9·The grooved geometrical structure of the support may be obtained by erosion of a metal sheet with abrasive media in a continuous process.
该支撑物的有凹槽的几何结构可以通过用磨蚀介质以连续操作的方式磨蚀金属片而获得。
10·This paper presents a study of using micro-abrasive water jet for the machining of micro-channels on brittle glasses. The erosion mechanism, surface pattern and process performance are studied.
作者在玻璃上进行微磨料水射流微细槽加工的实验基础上，对微磨料水射流加工的表面形貌、材料冲蚀去除机理及加工工艺性能进行了研究。